moonshine build kits, moonshine self build kit
The Knucklehead" Our 120 Gallon Micro Distillery, $200 flat rate shipping

“The Knucklehead” Our 120 Gallon Micro Distillery, $200 flat rate shipping

$2,499.00

SCROLL DOWN FOR PRODUCT DESCRIPTION

Choose Your Copper Thickness

EZ Clamp “NO PASTE” Cap Locking System

Eliminates the need for a flour / water paste to seal the cap to the pot

Choose your piping size

Piping size is the final reducing size coming off the cap that runs through the thumper and worm. Larger piping offers a faster run and more surface area to pull sulfur out of the product.

Vapor Cone Cleanout / Access Port

Access port for cleaning and charging still especially when a column is attached.

Conical Bottom for placing on a stand or adding legs

Note. Conical bottoms requires selecting at minimum the 32 oz copper upgrade for the necessary tig welding involved. Conical bottom reduces to 2″ sanitary triclamp fitting to accept sanitary drain valve and additional piping to discard spend distillate.

Custom Legs with adjustable feet welded on to Pot

2″ copper pipe welded and braced to elevate still. Legs braced and equipped with adjustable feet to level still on any surface. Legs capped on top for aesthetics.

Heat Still with custom steam jackets to save on electricity cost

Save on electricity cost by adding steam jackets to the still. Complete with steam inlet / outlets. Steam jackets surround the bottom of the pot for maximum efficiency, tig welded to ensure durability and pop off valves installed to ensure safety. Requires a steam generator / boiler sold separately.

Heat Still with our electric Upgrade including a 22KW 220 Volt Variable Power Controller

Complete description found in the Variable Power Controllers Category.

Choose Thumper Size

Choose your condenser size

Personalize it by engraving phrase, slogan or logo. Include this option for serialized stills for TBB registration.

30 character limit

Category:

Description

It is finally here folks. Hard work, determination and a lot of testing have finally yielding the Micro Distillery that we can put our name on. Here are just a few highlights:

The Vengeance 120 Gallon Micro Distillery

1) Made with 20 ounce copper standard but can be built in heavier 32 ounce 19 gauge

2) Seems riveted and soldered for durability

3) Silver Soldered

4) Can be upgraded to our 8″ EZ Clamp,  no messy flour water paste to seal the cap to the pot

5) Can be converted to electric to save $$ over using propane.

6) Heavy Duty 2″ drain valve included

7) Custom engraving option to have your Company Name or Logo on the Pot.

8) Produce over 30 gallons in a single run!!

Additional information

Weight 50 lbs
Dimensions 36 × 36 × 60 in